Video 1 deals with hardware, and video 2 with software setup.
The trials, tribulations and small triumphs of a Charlotte, NC astronomer imaging under Bortle 8/9 skies.
Sunday, January 13, 2013
Control an ETX or LX200 from Stellarium
Here are 2 short videos I made on how to control a Meade telescope from Stellarium. I am using an ETX in this demo, but I also use Stellarium to drive the 14 inch. As you can see, it's simple, quick, and easy!
Video 1 deals with hardware, and video 2 with software setup.
Video 1 deals with hardware, and video 2 with software setup.
Subscribe to:
Post Comments (Atom)
The Tulip Nebula—Hubble Palette
This image is just over 3 hours of integration on the Tulip Nebula. The image was stacked with star processing, initial histogram stretch, a...

-
I had a couple of emails asking how to defork an ETX telescope. The ETX 90 and ETX 125 were optically superb scopes, but the mounts left a...
-
The ZEQ25 doing its stuff on a cold night--imaging the Orion Nebula with an 8 inch f/4 astrograph. Note the lovely Christmas rug :) As ...
-
Like the Ring Nebula, the Dumbbell nebula is a planetary nebula marking the end of a star's life as it puffs off its outer layers into s...
No comments:
Post a Comment