Tuesday, October 8, 2013

ASI 120MC and Peltier--An Experiment

The ASI 120MC is a truly flexible camera. It can do planetary imaging as well as deep sky. However, like all uncooled cameras, it produces significant amounts of noise. While dark frame subtraction can take care of much of this noise, cooling the chip can greatly reduce noise and minimize processing. It also makes it easier to see deep sky objects as you monitor the exposure.

The camera's metallic case is a good conductor, so I decided to experiment to see how much cooling I could get by surface mounting a peltier cooler. I bought a very inexpensive (less than $5) 93-watt peltier and a $15 PC heatsink and fan.

The Alpine 64 has low vibration and 90 watts of cooling capacity


I then mounted the peltier to the heatsink (the heatsink has a conveneint adhesive thermal pad).

The peltier mounted on the heatsink
All that remained was to add a 12v power supply, place it on the imager, and turn the contraption on!

The working device!
The results are very interesting. The following images are captures showing chip temperature and the resultant image noise for a 17-second dark field exposure (click for a full-size image where all the noise will be visible).

Initial image. The original chip temp was 22 C. In a few seconds, it had cooled to this value.
The final image was taken at 0.5 C, about 5 minutes after turning the device on. As you can see, the noise is much reduced.
Significant noise reduction at 0.5C
However, the peltier and fan proved a little too demanding for my 13.8v, 6 amp supply (I knew I was pushing it) and it died rather horribly before I could continue cooling any further. However, the experiment was a success. The heatskink will be attached to the imager with rubber bands or bungies and powered with a more capable supply (like a car battery). For less than $25, this mod makes deep sky imaging a little easier for this fine camera. I appreciate very much the websites and forums that helped make this project possible.





Saturday, October 5, 2013

Niches Land Trust at Walnut Ridge

This is a late write up, but on September 21st, the local chapter of Niches Land Trust held an event at Arbor America, West Point, IN. Walnut Ridge Observatory is located at Arbor America and 20-30 people came to the stargazing event.  We were fortunate to have what was the best night of the year so far for seeing and transparency and the views of objects, from the Moon and Neptune to the Dumbell, M31, M13, the Ring Nebula, Alberio and other deep sky objects, was superb.

In the video below, I took a quick pan from the west to the east at sunset. The sky is showing a fine example of the Girdle of Venus, surrounding us in a pinkish glow (called an anti-twilight arch). The dark layer visible especially in the east, separating the pink glow from the horizon, is the shadow of the earth itself.

Panning from the sunset sky to the east. 


Luminaries light the way to the observatory

New Camera!


Here's an image of the cloudy skies over my home taken yesterday night with my new ZWO Optical ASI 120MC. The image is a 30-second exposure. The Summer Triangle stars Vega (top right), Deneb (top left) and Altair (bottom) are clearly visible. You can also see from the treeline why I had to build Walnut Ridge Observatory--there's not a lot of sky visible through the foliage!

The camera comes packed in a pleasing box and has a really useful accessory--a removable 180 degree all-sky lens (which I used to take the picture above).
The Camera Box
The Camera and Fisheye Lens


The camera has a very respectable QE of 55, is capable of high framerates at reduced resolutions (up to 65FPS) and can handle single exposures of up to 1024 seconds. The I120 is not cooled, which means long exposures can be noisy. However, I plan on adding a removable peltier cooler to the back of the case. For less than $25 extra, I'll get very superior performance. The camera also comes in a monochrome version. While the monochrome camera has some advantages (no Bayer Matrix and slightly higher sensitivity), the cost of adding a filter wheel was prohibitive, so I opted for the color version, which will do pretty much everything I need in a single shot. I'll post more on the mods, as well as more images (when the inevitable clouds clear).

Wednesday, August 21, 2013

Nova Delphini

Here's a 40- second shot of the new nova in Delphinus, which is a naked eye object. This image was taken with an ETX-125 and a Nikon D40. It's a single shot to get a record of the nova for the blog. Nova Delphini is the blue star near the center of the image. The "bobbliness" of the stars is due to vibration of the scope, but the shot shows the nova rather well.


Saturday, August 17, 2013

AR 1818 After Flare and Prominence

After a long, cloud-enforced hiatus, I had both free time and (relatively) clear skies coincide today. The images of AR 1818 show it about 40 minutes after a significant M-3 Class flare. As you can see, it is very bright in H-Alpha. The other image shows detail of a lovely prominence on the sun's edge near the active area. Imaged with PST-SolarMaxII and LifeCam.



Sunday, July 14, 2013

Saturn on July 12, 2013

Here are some Saturn images (first imaging from the new Walnut Ridge Observatory at West Point, IN). Seeing was downright diabolical--maybe 1/5, if that.  Focus was almost impossible to achieve as the image was "boiling" (the planet was visibly twinkling to the naked eye). The captures were with the 14 inch ACF with a Microsoft LifeCam Cinema HD. Captures were at 30FPS, 1280x720. Each capture was 2000 frames, with 400 and 800 of the best frames stacked for the images respectively. Stacking in Registax 5.1, wavelet processing in Registax 6 and lots of processing in Photoshop. The results show some nice color, but little detail. You can just make out the yellowish area in the north polar region which is where the polar hexagon lies--as captured very well by other amateur imagers as well as space probes.  The first image is a composite of the two processed images. It has a little more color depth and contrast, but the Cassini division is not even visible. Click on the individual images for a larger pic.



Wednesday, July 10, 2013

AR 1795 and AR 1787 on July 10, 2013



Above is a rather poor image of the complex area around spots AR 1785 and AR 1787 (towards the 12 o'clock position in this image).  The clouds broke for about 20 seconds and I captured around 200 frames before the skies clouded again. The image is disappointing due to poor seeing and the small number of frames I had to work with.  Taken with PST+SolarMaxII with LifeCam Cimema HD.

Seven hours on the Horsehead with the Seestar S50

The Horsehead Nebula never gets old. This image is a seven hour integration taken with the S50. I procesed it in Siril with RC Astro tools a...